• pasang iklan

Blogroll

Blogger news

Types of aerated lagoons or basins

Senin, 03 Maret 2008
There are many methods for aerating a lagoon or basin:
  • Motor-driven floating surface aerators
  • Motor-driven submerged aerators
  • Motor-driven fixed-in-place surface aerators
  • Injection of compressed air through submerged diffusers

[edit] Floating surface aerators

A Typical Surface-Aerated Basing (using motor-driven floating aerators)
A Typical Surface-Aerated Basing (using motor-driven floating aerators)
Ponds or basins using floating surface aerators achieve 80 to 90% removal of BOD with retention times of 1 to 10 days.[4] The ponds or basins may range in depth from 1.5 to 5.0 metres.[4]
In a surface-aerated system, the aerators provide two functions: they transfer air into the basins required by the biological oxidation reactions, and they provide the mixing required for dispersing the air and and for contacting the reactants (that is, oxygen, wastewater and microbes). Typically, the floating surface aerators are rated to deliver the amount of air equivalent to 1.8 to 2.7 kg O2/kWh. However, they do not provide as good mixing as is normally achieved in activated sludge systems and therefore aerated basins do not achieve the same performance level as activated sludge units.[4]

Biological oxidation processes are sensitive to temperature and, between 0 °C and 40 °C, the rate of biological reactions increase with temperature. Most surface aerated vessels operate at between 4 °C and 32 °C.[4]

0 komentar:

JS scarouse;

...